Galaxy S24 FE Window Insets

Compose Preview

// Galaxy S24 FE · 3-button · ROTATION_0 (captured 2026-09-28)
@Preview(device = "spec:width=1080px,height=2340px,dpi=450,cutout=punch_hole,navigation=buttons")
@Composable
fun S24FEPreview() {
    // Your screen here
}

Size and density match this capture exactly. Compose Preview draws its own generic system bars and cutout, not One UI's: check layouts against the measured insets above.

Window Size Class

Window

384 × 832 dp

Width / Height

Compact / Medium

• ROTATION_0Compact / Medium
  384 × 832 dp
• ROTATION_90Medium / Compact
  832 × 384 dp
• ROTATION_270Medium / Compact
  832 × 384 dp

From WindowMetrics' maximum window in each capture (breakpoints: width 600 / 840 dp, height 480 / 900 dp; Large ≥ 1200 dp). Rotations without a capture are never derived by swapping width and height.

Emulator

Screen from this capture and the official diagonal; other hardware entries are emulator defaults. Import in Device Manager › Create Virtual Device › Import Hardware Profiles.

# Galaxy S24 FE · 3-button · ROTATION_0 (captured 2026-09-28)
adb shell wm size 1080x2340
adb shell wm density 450
adb shell cmd overlay enable-exclusive --category com.android.internal.systemui.navbar.threebutton
adb shell cmd overlay enable-exclusive --category com.android.internal.display.cutout.emulation.hole
adb shell settings put system accelerometer_rotation 0
adb shell settings put system user_rotation 0

# Restore the emulator's defaults
adb shell wm size reset
adb shell wm density reset
adb shell cmd overlay enable-exclusive --category com.android.internal.systemui.navbar.gestural
adb shell cmd overlay disable com.android.internal.display.cutout.emulation.hole
adb shell settings put system user_rotation 0
adb shell settings put system accelerometer_rotation 1

Runs your app at this capture's window size and density in the selected navigation mode and rotation; open your app first, since a portrait-locked launcher keeps the display upright. The cutout is AOSP's generic punch hole and the system bars stay the emulator's own, so the measured insets above are not reproduced.